FOREWORD
A
Foreword
The AERCO KC Water Heating System is a true industry advance that meets the needs of
today's energy and environmental concerns. Designed for use in any potable water heating
system, it provides constant temperature water, regardless of flow rate. It’s small space
requirements and venting capabilities allow maximum installation flexibility. The KC Heater’s
load tracking controls modulate over a 20:1 turndown ratio for natural gas units and a 14:1
turndown ratio for propane units to match fluctuating system loads and yield high thermal
efficiencies.
With it’s compact design and direct or chimney venting, the KC Water Heating System is
adaptable to any installation. Efficiency, reliability and longevity make the KC Water Heating
System a true step forward in Water Heating System design.
After prolonged shutdown, it is recommended that the startup procedures in Section 4 and test
procedures in Section 5 of this manual be performed to verify system operating parameters. If
there is an emergency, turn off the electrical power supply to the KC Heater or close the
manual gas valve located before the unit. The installer is to identify the emergency shut-off
device. FOR SERVICE OR PARTS, contact your local sales representative or AERCO
INTERNATIONAL.
NAME:
ORGANIZATION:
ADDRESS:
TELEPHONE:
INSTALLATION DATE: ____________________________________________________
To Next Page
Loading...
