Indoor Humidity
Press the MENU key six times to select the INDOOR HUMIDITY section, the INDOOR
HUMIDITY section digits will start flashing. Press the UP or DOWN key to change the
humidity high alarm (press ON/OFF to enable/disable). If the alarm is enabled, an
alarm symbol appears in the display.
Press the ENTER key to select the following modes, then press the UP or DOWN key to
set the value:
Indoor humidity low alarm (press ON/OFF to enable/disable). If the alarm is
enabled, an alarm symbol appears in the display.
Maximum humidity (since last reset). Resetting the maximum indoor
humidity value - when both the indoor humidity value and MAX icon are
flashing, hold the ENTER key for 3s, the maximum indoor humidity value will
be reset to the current reading.
Minimum humidity (since last reset). Resetting the minimum indoor
humidity value - when both the indoor humidity value and MIN icon are
flashing, hold the ENTER key for 3s, the minimum indoor humidity value will
be reset to the current reading.
Indoor Temperature
Press the MENU key seven times to select the INDOOR TEMPERATURE section, the
INDOOR TEMPERATURE section digits will start flashing. Press the UP or DOWN key to
change the temperature unit between °C and °F.
Press the ENTER key to select the following modes:
Indoor temperature high alarm (press ON/OFF to enable/disable). If the
alarm is enabled, an alarm symbol appears in the display.
To Next Page
Loading...
