Maximum rainfall (since this was last reset). Resetting the maximum rainfall
value - when both the rain value and MAX icon are flashing, hold the ENTER
key for 3s, the maximum rain value will be reset to the current reading.
Clearing Total rainfall - when both the Total rain value and the word CLEAR are
flashing, hold the ENTER key for 3s, the Total value will be reset to zero (1h,
24h, Week, and Month rain values will be reset to zero automatically).
Memory
Press the HISTORY key to activate the history data display. Press the DOWN key to
toggle backwards to see earlier weather history data together with its time stamp, press
the UP key to see more recent weather history. When the history data is displayed,
the corresponding time will be displayed in the time section area (the history data saving
interval is preset to 30 minutes).
Pressing the ENTER key will trigger the memory clear procedure, the word “CLE” will
appear, and the memory usage icon will be flashing. Pressing and holding the ENTER
key for 3 seconds will clear the memory.
Note: Historical values for some variables are only available once downloaded to PC
and will appear as dashes on the Base Station.
Reset to Factory Default Settings
While in normal display, press and hold the UP key for 20 seconds to reset all settings to
the default settings.
To Next Page
Loading...
