Need help?Do you have a question about the AERMEC BHP Series and is the answer not in the manual?
General| Brand | AERMEC |
|---|---|
| Model | BHP Series |
| Category | Air Conditioner |
| Language | English |
Details functions like modes, timers, and disinfection cycles.
Lists parameters for setting temperature set-points and other operational values.
Configuration settings for unit operation and system components.
Procedure for turning the unit ON or OFF and confirming the action.
Choosing between Heat, Cool, Hot Water, or combinations.
Adjusts set-points based on external air temperature variations.
Configures daily time bands for unit operation with specific set-points.
Enables/disables the anti-legionella cycle with time and temperature settings.
Configures specific time bands for unit start and stop.
Activates emergency mode, excluding the heat pump.
Resets active unit errors after resolving the alarm condition.
Configures work set-points for cooling, heating, and DHW modes.
Displays current errors and alarms active on the unit.
Displays the alarm log for the unit, including the last 20 errors.
Guides for setting unit operation logic and installed components.
Defines control logic based on water temperature or ambient air temperature.
Activates/deactivates substitute heat source and defines logic for management.
Activates/deactivates additional electric heaters and sets thresholds.
Faults indicated by icons; details available in 'View' > 'Error' menu.
To Next Page
