Need help?Do you have a question about the AERMEC FK360 and is the answer not in the manual?
General| Brand | AERMEC |
|---|---|
| Model | FK360 |
| Category | Air Conditioner |
| Language | English |
General warnings for unit usage and safety.
Specific warnings and information regarding the R32 coolant gas.
Benefits and advantages of using R32 coolant gas.
Precautions and procedures for maintenance and repair.
Procedures and precautions for filling R32 coolant gas.
Guidelines for the safe disposal of R32 coolant gas.
Safety regulations for transporting and storing the unit.
Crucial safety instructions and guidelines for unit installers.
Safety advice and precautions for end-users of the unit.
General best practices and precautions for operating the unit.
Overview of the FK monoblock air conditioner types and applications.
Highlights of the FK air conditioner's functionalities and capabilities.
Defines the operational boundaries and safety limits of the unit.
Detailed specifications and technical parameters for FK models.
Essential precautions to ensure correct and safe unit installation.
Guidelines for optimal placement and mounting of the unit.
Specifies required clearances around the unit for proper function.
Instructions for setting up the condensate drainage system.
Important safety warnings related to electrical connections and power supply.
Physical dimensions and measurements of the FK models.
Procedure for testing the unit's functionality after installation.
Steps for verifying correct installation and initial operation.
General guidelines and safety precautions for maintenance.
Instructions for cleaning the exterior front panel of the unit.
Detailed steps for cleaning and maintaining the air filter.
Pre-operation checks to ensure the unit is ready.
Maintenance tasks to perform after the unit has been used.
Turns the unit on or off.
Activates and cycles through operating modes (COOL, DRY, FAN).
Increases or decreases the set temperature.
Selects the fan speed for the unit.
Selects the fan mode, adjusting airflow direction.
Sets the unit's on or off timer.
Receives signals from the remote control.
Alerts user when the air filter needs cleaning.
Controls the unit's power status remotely.
Selects operating modes (COOL, DRY, FAN) via remote.
Adjusts the set temperature using the remote control.
Adjusts fan speed using the remote control.
Controls the swing function for airflow direction.
Sets programmed start-up or shut-off times.
Indicates the remote control is sending a signal.
Activates or cancels the Sleep function.
Step-by-step guide for replacing batteries in the remote control.
Advice for optimizing comfort and reducing energy consumption.
List and explanation of error codes displayed by the unit.
To Next Page
