Need help?Do you have a question about the AERMEC HMI-BHP and is the answer not in the manual?
General| Brand | AERMEC |
|---|---|
| Model | HMI-BHP |
| Category | Controller |
| Language | English |
Displays the main interface, operating mode, errors, date/time, and allows setting work set.
Details various operational functions like mode selection, timers, and special modes.
Lists and explains the configurable operating parameters for the unit.
Describes how to view unit status, parameters, errors, and software version.
Explains how to turn the unit on or off using the main interface.
Describes how to navigate and select different menus from the main page.
Explains how to navigate through the Function menu pages and access specific functions.
Details how to select the operating mode (Heat, Cool, Hot water, etc.) for the unit.
Describes how to activate the fast hot water production function, potentially using an electric heater.
Explains how to set priority between cooling and domestic hot water production.
Explains how to navigate through the Parameter menu.
Sets temperature set-points for various operating modes like cooling and hot water.
Explains how to navigate the View menu to access information.
Displays the current status of various unit components like compressor, fan, valves, etc.
Explains navigation within the Commission menu for unit setup.
Sets the unit control logic based on water temperature or ambient air temperature.
Sets the status (On/Off) of the 2-way valve in cooling mode.
Explains how to navigate through the Main Menu.
Changes the unit of measurement for temperature (Celsius or Fahrenheit).
Activates or deactivates the saving of parameter/function settings in memory.
Sets the current date and time for the system.
To Next Page
