28
COMMISSIONING WARNINGS
owner of the machine, the units in this series can be started up by the
START-UP
OPERATIONS TO BE PERFORMED WITH NO VOLTAGE PRESENT
ATTENTION
the unit is not working:
OPERATIONS TO BE PERFORMED WITH THE UNIT LIVE
ATTENTION
the unit is sll not working:
HYDRAULIC CIRCUIT CONTROLS
(Mandatory component for
warranty to be valid).
COMMISSIONING
be commissioned
OPERATIONS TO BE PERFORMED WITH MACHINE ON
ATTENTION
the unit is working:
problem, disconnect and swap the wires between two of the phases,
is performed
ATTENTION
The an-freeze set temperature can only be varied by an authorised aer-
sales centre and only aer having checked that there is a suitable % of
an-freeze soluon in the water circuit.
Whenever this alarm intervenes, call the nearest authorised aer-sales
service immediately
To Next Page
Loading...
