9
fiss a su di un pall
Ulizz elli el
per la m vime azione
ATTENTION
The unit comes fixed on a pallet.
Use forklis for handling
LIFT THE UNIT
Before lifting the unit, place protections between the belts and the
framework to prevent damage to the structure.
The units NXP are delivered with lifting eyebolts, for lifting use suitable
straps, hook the lifting chains to the eyebolts provided.
• Follow all safety regulations and standards
• Wear protective goggles and work gloves
• Pay the utmost attention to heavy and bulky equipment during
lifting and handling, and when placing it on the ground.
• All panels must be tightly xed before moving the unit;
• Before lifting, check the specic weight on the technical plate.
• Use all, and only, the lifting points indicated;
• Use ropes in compliance with Standards and of equal length;
• Handle the unit with care and without sudden movements
• Do not stand under the unit during lifting
• The machine must be kept in a vertical position
Attention: the units cannot be stacked
MINIMUM TECHNICAL SPACES
NXP
A1 mm 1000
B1 mm 800
B2 mm 1100
C1 mm 800
C2 mm 800
Minimum technical spaces
C2
The unit must be installed in order to
make possible the maintenance and
/ or repair.
To Next Page
Loading...
Need help?
General
