8
Technical plate
RECEPTION
Technical plate
Packaging label
NOTE: Plasc elements can be used to protect the units against damage
during transport. The machine is also wrapped in packaging. We recom-
mend keeping this protecon during all transport and liing operaons
and not remove the plasc elements unl commissioning.
If the unit has an-vibraon supports, they must be installed on the unit
before final posioning.
If the product is damaged, send a registered leer with the details of the
problem to the shipping company within 48 working hours from delivery.
CAUTION: ALWAYS USE ALL THE UNIT LIFTING POINTS PROVIDED
Aenon: the units cannot be stacked
To Next Page
Loading...
Need help?
General
