AERMEC NXW - INPUTS;OUTPUTS Menu - Output Status; Condenser Flow Switch Inputs; Compressors Digital Outputs (Circuit 1); Compressors Digital Outputs (Circuit 2)

50
INPUTS/OUTPUTS menu - Condenser pumps digital outputs
Visualisation on unit display Index Display/Parameter
A Inputs/Outputs: Indicates the state of the different entries/exits.
B Master: indicates the type of data displayed; the displays can be:
• Analogue inputs;
• Digital inputs;
• Digital outputs;
C/D 05-06: indicates the status of the pumps indicated, the status
of these outputs can be one of the following:
• Closed = pumps ON;
• Open = pumps OFF;
• --- = pump not present;
B
Input/Output
Master digital output
A
C
05= Condensing pump 1:
Close
06= Condensing pump 2:
---
D
INPUTS/OUTPUTS menu - Compressors digital outputs (circuit 1)
Visualisation on unit display Index Display/Parameter
A Inputs/Outputs: Indicates the state of the different entries/exits.
B Master: indicates the type of data displayed; the displays can be:
• Analogue inputs;
• Digital inputs;
• Digital outputs;
C/D 01-02: indicates the status of the compressors indicated, the
status of these outputs can be one of the following:
• Closed = compressor ON;
• Open = compressor OFF;
B
Input/Output
Master digital output
A
C
01= Comp.1 circ.1:
Close
02= Comp.2 circ.1:
Open
D
INPUTS/OUTPUTS menu - Condenser flow switch digital inputs
Visualisation on unit display Index Display/Parameter
A Inputs/Outputs: Indicates the state of the different entries/exits.
B Master: indicates the type of data displayed; the displays can be:
• Analogue inputs;
• Digital inputs;
• Digital outputs;
C 17: indicates the status of the flow switch positioned on the
condenser, the status of this input can be one of the following:
• Closed = normal functioning;
• Open = minimum water flow rate threshold exceeded at the
condenser (Flow switch alarm);
B
Input/Output
Master digital input
A
C
17= Cond.water flow:
Close
INPUTS/OUTPUTS menu - Compressors digital outputs (circuit 2)
Visualisation on unit display Index Display/Parameter
A Inputs/Outputs: Indicates the state of the different entries/exits.
B Master: indicates the type of data displayed; the displays can be:
• Analogue inputs;
• Digital inputs;
• Digital outputs;
C/D 01-02: indicates the status of the compressors indicated, the
status of these outputs can be one of the following:
• Closed = compressor ON;
• Open = compressor OFF;
B
Input/Output
Master digital output
A
C
03= Comp.1 circ.2:
Close
04= Comp.2 circ.2:
Open
D