53
AFTER-SALES ASSISTANCE menu - INFORMATION sub-menu - Display of system information
Visualisation on unit display Index Display
A Information: Indicates information regarding the system.
B This window indicates some information linked to the control
system hardware.
AFTER-SALES ASSISTANCE menu - LANGUAGE CHANGE sub-menu - Enabling of language selection on start-up
Visualisation on unit display Index Display
A Language: Indicates the system language.
B
Control: indicates the possibility to enable or disable the sys-
tem language selection at every unit start-up.
C
Display time: indicates the time within which it will be possible
to select the system language during the start window. If the
language selection window option is disabled on start-up, this
parameter will not be visible.
AFTER-SALES ASSISTANCE menu - LANGUAGE CHANGE sub-menu - Language selection
Visualisation on unit display Index Display
A Language: Indicates the system language.
B Language: indicates which language is set for the display.
C
Control: indicates the control for modifying the system lan-
guage.
AFTER-SALES ASSISTANCE menu
The after-sales assistance menu contains some sub-menus that are protected by a password. These
sub-menus are not available to the user and their management is only allowed by staff authorised for
after-sales assistance of the unit.
!
Parameters that can be modified by the user
Language
Language:
A
B
ENTER to change
ENGLISH
C
Language
Disable language mask
A
B
at start-up:
NO
Show mask time: 20s
C
Information
Aermec S.p.A.
A
B
code:Aerchiller
Ver.:2.2 19/03/10
Bios:4.35 10/09/09
Boot:4.01 13/04/06
Parameters that can be modified by the user
AFTER-SALES ASSISTANCE menu - BOARD CHANGE sub-menu - Display of board address
Visualisation on unit display Index Display
A Board change: Indicates the address of the board.
B This window indicates the address of the control board.
Board switch
Unit address:1
A
B
116
17 32
To Next Page
Loading...
