AERMEC NXW - Page 62

62
ALARMS summary table
Alarm code Rearm Description
AL84 Condenser pump 1 circuit breaker alarm (Slave)
AL85 Evaporator pump 2 circuit breaker alarm (Slave)
AL86 Evap. inlet water temperature probe slave broken or not connected
AL87 Cond. inlet water temperature probe broken or not connected slave
AL88 Cond. outlet water temperature probe broken or not connected slave
AL89 pCOe offline
AL90 pCOe: Analogue input channel 1 probe disconnected or broken (Slave)
AL91 pCOe: Analogue input channel 2 probe disconnected or broken (Slave)
AL92 pCOe: Analogue input channel 3 probe disconnected or broken (Slave)
AL93 pCOe: Analogue input channel 4 probe disconnected or broken (Slave)
AL94 pCOe: I/O mismatch alarm (no confirmation of pattern for 10s)
AL95 pCOe offline (Slave)
AL96 pCOe: Analogue input channel 1 probe disconnected or broken (Slave)
AL97 pCOe: Analogue input channel 2 probe disconnected or broken (Slave)
AL98 pCOe: Analogue input channel 3 probe disconnected or broken (Slave)
AL99 pCOe: Analogue input channel 4 probe disconnected or broken (Slave)
AL100 pCOe: I/O mismatch alarm (no confirmation of pattern for 10s) (Slave)
AL101 pCOe number 2: offline (DK version probes expansion)
AL102
pCOe number 2: Analogue input channel 1 probe disconnected or broken
(DK version Probes expansion)
AL103
pCOe number 2: Analogue input channel 2 probe disconnected or broken
(DK version Probes expansion)
AL104
pCOe number 2: Analogue input channel 3 probe disconnected or broken
(DK version Probes expansion)
AL105
pCOe number 2: Analogue input channel 4 probe disconnected or broken
(DK version Probes expansion)