57
IVEDPY 1110 - 4879010_01
KFV CIRCULAR FLANGE KIT FOR INTAKE OR DELIVERY PLENUMS
KFV is a plastic variable section intake/delivery circular flange kit.
This accessory allows to connect an additional circular duct using
connection points present on the sides of the inlet/delivery plenum of the
VED unit.
ACCESSORIES
DUCTING ACCESSORIES:
RPM_V DELIVERY PLENUM WITH RECTANGULAR FLANGE
RPM_V is an internally insulated galvanised steel delivery
plenum with rectangular flange . This accessory allows to
connect a duct of rectangular section to the delivery outlet of
the VED unit.
Due to the different system needs, the RPM_V accessory
allows the delivery both longitudinally and perpendicularly
to the air flow passing through the VED unit.
A circular duct can be connected to the sides of the RPM_V
delivery plenum by means of the accessory KFV.
PM_V DELIVERY PLENUM WITH CIRCULAR FLANGE
KFV
KFV
RPM_V
PM_V is an internally insulated galvanised steel delivery
plenum with a plastic variable section circular flange. This
accessory allows to connect ducts of circular section to the
delivery outlet of the VED unit.
Due to the different system needs, the PM_V accessory allows
the delivery both longitudinally and perpendicularly to the
air flow passing through the VED unit.
A circular duct can be connected to the sides of the PM_V
delivery plenum by means of the accessory KFV.
KFV
KFV
PM_V
Ø 180
Ø 150
Ø 200
To Next Page
Loading...
