GENERAL INFORMATION
11
PXI Studio, supplied with the module, configures your PXI modules as logical instruments
using an intuitive and powerful graphical interface. PXI Studio provides comprehensive
signal generator, digitizer and spectrum analyzer applications and optional analysis plugins to
suit specific communications systems.
RF Investigator, also supplied with the module, is an application that provides combined
operation of all Aeroflex 3000 Series modules from a single user interface, especially useful
for acceptance testing.
Refer to Getting Started with afDigitizer (part no. 46892/676) supplied on the PXI Modules
CD-ROM part no. 46886/028. An FFT spectrum analyzer measurement suite is supplied, and
optional signal analysis components are available to measure power, modulation quality and
spectra to recognized communications standards.
Deliverable items
• 3030 Series Wideband RF Digitizer PXI module
• PXI Modules CD-ROM (part no. 46886/028), containing soft front panels, drivers,
application software, data sheets, installation guides, safety instructions, getting started
and user manuals for this and other modules in the 3000 Series
• 3000 Series PXI Modules Safety Instructions: printed item, part no. 46882/882
• SMA connector cable: part no. 43139/738; 2 off for 3030A/3035 and 1 off for 3030C
• SMA connector cable: part no. 43139/739; 1 off for 3035C/3036
• SMA connector saver: part no. 46885/224, 1 off
Cleaning
Before commencing any cleaning, switch off the chassis and disconnect it from the supply.
You can wipe the front panel of the module using a soft cloth moistened in water, taking care
not to wet the connectors. Do not use aerosol or liquid solvent cleaners.
To Next Page
Loading...
Need help?
General
