Aeroflex 3030 Series User Manual

GENERAL INFORMATION
12
Putting into storage
If you put the module into storage, ensure that the following conditions are not exceeded:
Temperature range: −20 to +70°C (−4 to +158°F)
Humidity: 5 to 93%, non-condensing
Specifications
For the latest specifications, see the data sheet included on the CD-ROM (part no. 46886/028)
or go to the Aeroflex website.
All 3030 Series specifications are defined when used in conjunction with the 3010/11 RF
Synthesizer PXI module and driver software supplied with the module.
Warm-up time
Allow at least twenty minutes for a module to warm up and meet its specifications fully after
booting.
Calibration and servicing
The recommended calibration interval is 24 months.
There are no user-serviceable parts in these modules; if any attention is needed, return the
module to your Aeroflex agent.

Aeroflex 3030 Series Specifications

General

Brand	Aeroflex
Model	3030 Series
Category	Measuring Instruments
Language	English