For Safety
Changing the Fuses
1.
Before changing the fuses,
ALWAYS
remove the
power cord from the power-outlet before replacing the
blown fuses.
ALWAYS
use new fuses
of
the type and
rating specified on the fuse marking on the rear panel
cabinet.
Cleaning
Maximum Input
T3.15A indicates a time-lag fuse.
There is risk
of
receiving a fatal electric shock if the
fuses are replaced with the power cord connected.
2.
Keep the power supply and cooling fan free
of
dust.
Clean the power inlet regularly.
If
dust accumulates
around the power pins, there is a risk
of
fire. Keep the
cooling
fan
clean
so
that the ventilation holes
are
not
obstructed.
If
the ventilation is obstructed, the cabinet
may overheat and catch fire.
3. Maximum DC voltage ratings:
RF Input
±20 V dc
Maximum AC power ratings:
RF Input +26 dBm
Excessive power may damage the internal circuits.
3