In case where the ceiling is higher than 3m, accordingly there is the need to channel down the air flow,
Aertesi provides an accessory panel with adjustable flaps. So you can set manually, for each of the four
turns, the orientation of the flow: horizontal (with Coanda effect), or in vertical position.
Flaps on horizontal position (Coanda) Flaps on vertical position
4- KEY READING CODES
The standard version is with 3-rows coil (for versions 2 pipes) or 1 + 2 ranks (for versions 4 pipes), with fixed
blades in COANDA position. All other versions are optional.
To Next Page
Loading...
