DURATI battery-powered shearing machine
8
¾ Connect charger 4: plug the device plug of the
mains power cord 5 into the charger 4.
¾ Plug in the mains plug of mains power cord 5 at
the mains power socket.
¾ Insert Li-ion battery 7 in charging bay 6 of
charger 4 and charge the battery.
- or -
¾ Insert the DURATI battery-powered shearing
machine 2 in charging bay 10 of the charger 4 and
charge the machine
Charge status indicator 8 or 9 blinks green.
After charging, the charge state indicator 8/9
lights up green and the DURATI battery-powered
shearing machine 2 / with Li-ion battery 7 is ready
for operation.
5.2 DURATI battery-powered shearing
machine function test
¾ Carry out a visual inspection.
¾ Check the switch position.
¾ Install the battery, see Li-ion battery.
¾ Mount the shearing head correctly and lubricate it
if necessary, see Safe handling: Blade.
¾ Keep a charged Li-ion battery on hand, as reserve.
¾ Clean DURATI battery-powered shearing machine
prior to use, see Cleaning/Disinfection.
5.3 Function checks of the charger
¾ Carry out a visual inspection.
¾ Prior to connecting the product to mains power:
– Check the mains power cord 5 for any damage.
– Check the product for possible damage (e. g.
check for bent contacts of the charging bays).
¾ Plug in mains power cord 5 at the device socket of
the charging station.
¾ Plug in the mains plug at the mains power socket.
¾ Insert Li-ion battery 7 in charging bay 6 of
charger 4 and charge the battery.
- or -
¾ Insert the DURATI battery-powered shearing
machine 2 in charging bay 10 of the charger 4 and
charge the machine
Charge status indicator 8 or 9 blinks green.
After charging, the charge state indicator 8/9
lights up green and the DURATI battery-powered
shearing machine 2/with Li-ion battery 7 is ready
for operation.
The product is ready for operation.
5.4 Safe handling: Blade
5.4.1 Sharpening the cutting plate
Note
For sharpening the cutting plate, please contact Tech-
nical Service, see Technical Service.
5.4.2 Changing the shearing head
Fig. 4
¾ Press ON/OFF switch 11 to switch off the DURATI
battery-powered shearing machine.
WARNING
Risk of injury caused by sharp cut-
ting plates!
¾ Handle the shearing head of the
DURATI shearing machine care-
fully.
13
To Next Page
Loading...