Need help?Do you have a question about the Aeware In.k200 and is the answer not in the manual?
Overview of the in.k200 keypad, its features, configurations, and compatibility with other spa systems.
Details the function of the Smart winter mode, Pump, Light, Filter, Heater, and Set Point indicator lights.
Explains the operation of Key 1, Key 2, Light key, and Up/Down keys for controlling spa functions.
Provides physical dimensions, weight, and relevant standards for the in.k200 keypad.
Specifies the storage and operating temperature ranges, and humidity levels for the keypad.
Step-by-step guide for drilling holes and mounting the in.k200 keypad onto the spa surface.
Illustrates and explains how to connect the in.k200 keypad to the in.xe spa system via the in.link cable.
Instructions for using Key 1, Key 2, and Light key to control spa pumps and lighting.
Guides on setting desired temperature and programming filter cycles, including duration and frequency.
Details on programming purge cycles, water temperature regulation, and heater operation modes.
Explains the Smart Winter Mode for freeze protection and the cooldown function for the heater.
Lists other keypad models available for the in.xe spa system, detailing their features.
Presents typical default and adjustable settings for Set Point, filter cycles, pump runtime, and light timeout.
To Next Page
General
