Need help?Do you have a question about the Aeware in.k400 and is the answer not in the manual?
Details the in.k400 as a compact, full-featured keypad for complete control with wet fingers.
Illustrates button configurations for 2-pump and 3-pump spa systems for user interaction.
Explains the meaning of various icons like Pumps, Service, Heater, Filter Cycle, and Set Point on the display.
Provides precise measurements for drilling holes required for keypad installation, ensuring correct placement.
Details two installation methods: using adhesive gasket and using mounting brackets with wing nuts.
Illustrates the wiring procedure for connecting the in.k400 keypad to the in.xm control system.
Explains the operation of the On/Off key for controlling pumps and entering standby mode.
Details how to operate Pump 1 and Pump 2 keys for low and high speeds, including auto shut-off.
Describes operation of Pump 3/Blower key, Light key with intensity control, and auto shut-off timers.
Explains the use of Up/Down keys to set desired water temperature and the Set Point indicator.
Details how to use the Program key to set time, filter cycles, and temperature units.
Covers setting temperature units, water temperature regulation, cooldown, and Smart Winter Mode.
Provides physical dimensions of the in.k400 keypad, including panel and gasket measurements.
Lists environmental ranges for storage and operation, humidity limits, and mechanical specifications.
Outlines the safety and compliance standards met by the in.k400 keypad, including UL and CSA.
To Next Page
General
