EasyManua.ls Logo

Aeware in.k400 - Functions; On;Off and Standby Modes; Pump Operation

Aeware in.k400
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
in.k400
On/Off key
Depending on the spa manufac-
turer, this key may have differ-
ent functions: On/Off, Standby
mode or quick enable of the
Economy mode.
Standby Mode : Use On/Off
key to pause all pumps*.
Progress bar will display the
remaining time before the
system automatically exits
Standby mode (user can also
exit Standby mode at any time
by pressing again on On/Off key).
In order to warn the user, the
spa light will ash for a few
seconds before the exit of
Pump 1 key
Press Pump 1 key to turn
Pump 1 on at low speed.
Press a second time to turn
pump to high speed (with a
dual-speed pump).
A third time turns pump off.
A built-in timer automatically
turns pump off after 20 min-
utes, unless pump has been
manually deactivated fi rst.
Pump 2 key
Press Pump 2 key to turn
Pump 2 on at low speed.
Press a second time to turn
pump to high speed (with a
dual-speed pump).
A third time turns pump off.
A built-in timer automatically
turns pump off after 20 min-
utes, unless pump has been
manually deactivated fi rst.
Standby mode and restart the
pumps. The "Stby" message is
also displayed during Standby
mode.
* Pump will stay turned on if
there is a request for more heat.
functions

Related product manuals