22 RE-50-RE-75-OI-vers. 2.6 gb 28.07.14
3.1.9 Measured values with
3.2.0 Installation of external Modules
The rotary flange is designed for the attachment of Afag modules. If third party mod-
ules are used the rotary flange can also be removed.
The engineer can also manufacture a customized rotary flange which can be at-
tached to third party modules.
The permissible useful loads of the module must be observed, see
Technical Table.
The manufacturer does not guarantee for modifications on RE mod-
ules carried out by the customer.
The manufacturer does not accept any liability for damage resulting
from such modifications. The risk is that of the user alone.
To Next Page