Afag RE Series - Table of Contents; EC Declaration for Incorporation

RE-50-RE-75-OI-vers. 2.6 gb 28.07.14 5
1.0.0 EC Declaration for Incorporation
1.1.0 According to 2006/42/EC dated 09. June 2006, Appendix II B VI for
Incorporation of partly completed machinery.
The manufacturer: Afag Automation AG, Fiechtenstrasse 32, CH-4950 Huttwil
Tel. 0041 (0)62 959 87 02, www.afag.com
As manufacturer of the partly completed machine we declare that:
- The specified machine corresponds to the listed essential requirements of the
directive 2006/42/EG, wehere applicable the other directives and standards
listed below.
Producte name:
Rotary modules electrical
Types:
RE-50 / RE-75
RE-50 24V/48V
RE-75 48V
Sequential series:
The actual serial number will
be sticked in here upon delivery
of the device.
- Machinery Directive 2006/42/EC
- Low voltage Directive 2006/42/EG
- EMV-Guideline 2004/108/EG
- EG Production Safety Directive 2001/95/EG
- EG RoHS 2002/95/EG
- The relevant technical documentation is compiled in accordance with part B of Annex
VI
- The relevant technical documentation in accordance with part B of Annex VI will be
transmitted in response to a reasonable request by the national authorities in printed
from or in electronic from (pdf).
-
Notes to the Declaration of Incorporation according to the Machinery Directive
2006/42/EC, Annex IIB, section 4.
(Checklist on accurate and basic health and safety requirements).
- 1.1; 1.1.1; 1.1.2; 1.2; 1.2.1; 1.2.3; 1.2.4.4; 1.2.5; 1.3; 1.3.3; 1.3.5; 1.3.6; 1.3.7; 1.3.8.1;
1.3.8.2; 1.3.9; 1.4; 1.4.1; 1.5; 1.5.1; 1.6; 1.6.1; 1.6.3; 1.6.4; 1.7; 1.7.1; 1.7.4.; 1.7.4.1;
1.7.4.2; 1.7.4.3; 3.3.5; 3.4.1
- Increase of the harmonized standards applied:
-
EN 349; EN ISO 12100-1; EN 12100-2; EN ISO 14121-1; EN 60204-1: 2006
partly
fulfilled