RE-50-RE-75-OI-vers. 2.6 gb 28.07.14 33
4.1.8 Disassembly and repair
When the module is damaged it can be returned to Afag Automation AG for repair.
Before disassembly the power supply must be switched off and
disconnected. Disassembly of the system may only be started
after the power supply was definitely disconnected.
When the costumer detects that the respective module is still under guarantee:
- he returns the module to Afag Automation AG for repair.
Afag automation AG offers a reliable repair service.
Please note that Afag does not guarantee for modules which were
not repaired by the Afag Automation AG.
5 Disposal
RE rotary modules which cannot be used any more must not be dis-
posed off as a complete unit, but must be disassembled and recy-
cled according to the type of material. Materials than cannot be recy-
cled must be disposed off in accordance with the legal regulations.
To Next Page