Afag RE Series - Maintenance Instruction; Maintenance and Servicing

28 RE-50-RE-75-OI-vers. 2.6 gb 28.07.14
4.0.0 Maintenance Instructions
4.1.0 Maintenance and servicing
WARNING
Due to the rotating movement of the rotary flange garments,
hair or other materials may be caught and drawn into the sys-
tem while the module is being operated.
Observe the Montage Instructions of the system into which the
RE rotary module was incorporated.
Maintenance and servicing may only be carried out by qualified
personnel.
WARNING
Always switch off the controller and protect it from being
switched on again unintentionally when you work on the RE
rotary module. The signals of the control system can cause un-
intentional movements of the module which may lead to per-
sonal injuries.
Observe the Montage Instructions of the control system used.
DANGER
An inadmissible removal of the connector cover
2
may lead to an
electric shock.
Never remove the connector cover from an installed RE rotary
module.
3
3
See Module Description 2.3