A Open HARDWARE BAG 7.
B Slide the right (R) UPPER HANDLEBAR
(13) onto the right LOWER HANDLEBAR
(12) making sure handlebars are joined
together completely. Secure the UPPER
HANDLEBAR (13) to the LOWER
HANDLEBAR (12) using PRE-ATTACHED
SET SCREWS (14).
C Slide right (R) HANDLEBAR COVERS (15)
over UPPER HANDLEBARS (13) and attach
using 1 SCREW (M).
D Repeat STEPS B–C on left side.
HARDWARE FOR STEP 7
PART TYPE DESCRIPTION QTY
M SCREW M4X0.7PX8L 4
NOTE: Make sure upper handlebars are as far
down as possible. Handlebars can be damaged
If not secured correctly.
To Next Page
Loading...
