Afikim Breeze-C Maintenance Manual


6. Front Electronics Board Setup
The Horns can be setup to work in one of the follows options
: Controller alarms, Tiller push button , Reverse alarm ,
Blinkers alarms.
The front board include setup options for the Horn. This can
be done with the dipswitch DSW1 that is on the front board.
Deep switch : User Modes setup with relate to user needs.
Dip Switches Setup is as follows : (Shown the Default
Set Up)
State
Description
"1" = Off
Horn while blinker or hazard are on .
"2" = On
Horn while derive backward
"3" = Off
When the battery too low – the scooter stop.
"4" =
No use.
"1"
"2"
"3"

Afikim Breeze-C Specifications

General

Brand	Afikim
Model	Breeze-C
Category	Scooter
Language	English