Why is the liquid line covered with frost on my AFINOX Infinity Chiller?
If the liquid line of your AFINOX Chiller is covered with frost, it indicates that the dehydrating filter is clogged. In this case, you should call a qualified engineer and inform them of the read error and product serial number.
What to do if my AFINOX Infinity Chiller displays a 'Door 1 open alarm'?
If your AFINOX Chiller shows a 'Door 1 open alarm', ensure that you close the door.
What should I do if the 'Door 2 open alarm' appears on my AFINOX Infinity?
If your AFINOX Chiller displays a 'Door 2 open alarm', make sure to close the second door.
Why does the compressor not load on my AFINOX Chiller?
If the compressor of your AFINOX Chiller does not load, it may be due to an error in the connection of the solenoid valve or a by-pass light filter occlusion (high end). In either case, you should call a qualified engineer and inform them of the read error and product serial number.
Lists all essential components and parts required for assembling the Infinity trolley unit.
Detailed instructions for the physical assembly of the Infinity trolley cell structure.
Guidance on connecting the refrigerant pipelines to the unit's temperature regulator, with key recommendations.
Procedures for safe electrical installation, circuit breaker selection, and phase rotation checks.
Instructions for correctly connecting the condensate water discharge pipe and its syphons.
Steps for the initial startup of the Infinity trolley, including system testing and interface navigation.
Comprehensive guide to common malfunctions, alarm signals, and their solutions for the Infinity trolley.
To Next Page
General