Afore SAPM-10KW User Manual

Connect the Smart Meter to Three-phase System
14
a. For Three-phase 3-25kW Setting
7.4 Multiple Inverter System Connection Setting
Afore3
UKOB
ENT
Meter
No Meter
Meter Param
P Mode
UP/DOWN
Choose Meter Param
ENT
Afore New Energy
PPv: xxxW
PGrid: xxxW
ENT
ENT
ENT
Run Param
Prot Param
* * * *
UP/DOWN
Choose Run Param
UP/DOWN
Choose password: 5432
UP/DOWN
Choose Meter
UP/DOWN Choose Afoer3
press ENT to confirm
Com Param
Run Infor
UP/DOWN
Choose Com Param
ESC
Wifi
Parallel
Meter Param
P Mode
UP/DOWN
Choose Meter Param
ENT
ENT
UP/DOWN
Choose Parallel
UP/DOWN
设置逆变器数量2,3,4...10
ENT
UP/DOWN
Choose ON
UP/DOWN
设置主机/从机
ENT
ENT
UP/DOWN
设置逆变器地址1,2,3...9press ENT to confirm
ENT P Enavble OFF
ON
Inv-Amout 2
M/S Master
M/S Master
Addr 0
Addr 1
Inv-Amout 2
Note:
For the multiple-inverter system, set the Master inverter Addr address as
1, set the Salve inverter Addr address as 2, 3, 4… separately.

Afore SAPM-10KW Specifications

General

Brand	Afore
Model	SAPM-10KW
Category	Measuring Instruments
Language	English