Why is plug-and-play not working on my AG Neovo Monitor?
If you're experiencing issues with plug-and-play functionality on your AG Neovo Monitor, please check the following: * Confirm that the plug-and-play function of the device is compatible with your PC. * Ensure your display card supports plug-and-play. * Inspect the 15-pin D-sub connector on the signal cable for any bent pins.
Why is my AG Neovo Monitor flickering?
If your AG Neovo Monitor picture is flickering or has ripples, this may be due to electronic disturbance from nearby electrical appliances or equipment.
How to fix color shortage on AG Neovo Monitor?
If you notice a color shortage (red, green, or blue) on your AG Neovo Monitor, check the signal cable to ensure every pin is not bent.
Why is the power indicator light not on for my AG Neovo Monitor?
If the power indicator light on your AG Neovo Monitor is not on, verify that the power is on and the power cord is securely connected.
What to do if AG Neovo Monitor white color looks off?
If the white color appears off or discolored on your AG Neovo Monitor, adjust the RGB color settings or reselect the color temperature.
How to fix dim picture on AG Neovo Monitor?
If the picture on your AG Neovo Monitor appears dim, try adjusting the brightness and contrast settings.
How to fix blurry font on AG Neovo Monitor under VGA?
If the screen font appears blurry under VGA signal on your AG Neovo Monitor, select the “E” option to automatically adjust the image.
How to correct screen color error on AG Neovo Monitor under VGA?
If you observe a screen color error under VGA signal on your AG Neovo Monitor, select “Auto color” in the OSD (On-Screen Display) to correct it under the white output screen.
General| Screen Size | 22 inches |
|---|---|
| Resolution | 1680 x 1050 |
| Panel Type | TN |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Aspect Ratio | 16:10 |
| Viewing Angles | 170° horizontal, 160° vertical |
| Connectivity | VGA |
To Next Page
