Why is there no picture on my AG Neovo LW-22G and the LED indicator is off?
If your AG Neovo monitor displays no picture and the LED indicator is off, ensure the monitor is turned on. Also, check that the power cord is securely connected to both the monitor and the power outlet.
What to do if my AG Neovo LW-22G Monitor has no audio output?
If there's no audio output from your AG Neovo monitor, verify that the volume isn't set to 0. Also, check the Audio Volume setting in the Other menu to ensure it's not muted. If you are using VGA input, check the audio setting of the computer.
What to do if faint shadows appear on the screen of my AG Neovo LW-22G?
If you notice faint shadows from a static image on your AG Neovo monitor screen, try turning off the monitor for extended periods. Alternatively, use a screen saver or a black and white image and run it for extended periods.
What to do if the displayed texts are blurry on my AG Neovo LW-22G?
If the displayed texts are blurry on your AG Neovo monitor when using VGA input, press the AUTO button to auto-adjust the monitor. Additionally, adjust the Clock and Phase settings in the Picture menu.
Why is my AG Neovo LW-22G Monitor LED indicator green?
If the LED indicator on your AG Neovo monitor is green, make sure that the computer is turned on and not in standby mode. If the computer is in standby mode, move the mouse or press any key to wake it up.
What to do if dew formed on the LCD AG Neovo LW-22G?
If dew has formed on your AG Neovo LCD monitor, which often occurs when moving it from a cold to a hot environment, do not turn on the monitor. Wait for the dew condensation to disappear before use.
General| Screen Size | 22 inches |
|---|---|
| Resolution | 1680 x 1050 |
| Panel Type | TN |
| Brightness | 300 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Aspect Ratio | 16:10 |
| VESA Mount | 100 x 100 mm |
| Viewing Angle | 170° horizontal / 160° vertical |
| Connectivity | DVI-D, VGA |
| Power Consumption | 45W (operational), <1W (standby) |
To Next Page
