How to fix no picture on AG Neovo QX-24?
If your AG Neovo Monitor isn't showing a picture, ensure the power cord is properly plugged in and the power switch is turned on. Also, verify that a signal connection is correctly connected to the display.
What to do if there is picture but no sound on AG Neovo QX-24?
If you can see a picture on your AG Neovo monitor but hear no sound, check the following: * Ensure that both video and sound input cables are correctly connected. * Verify the volume isn't turned all the way down by pressing the volume button on the control panel or remote control. * Make sure the MUTE function is off by pressing the Mute button. * If using external speakers, ensure they are connected and the volume is set appropriately.
Why is the picture distorted on my AG Neovo QX-24?
If the picture on your AG Neovo monitor is distorted with abnormal patterns, ensure the signal cable is firmly attached. Also, check that the input signal is within the display's capabilities, referring to the specifications section for verification.
How to reduce interference on AG Neovo Monitor?
If you're experiencing interference or audible noise with your AG Neovo monitor, it may be caused by surrounding electrical appliances or fluorescent lights. Try moving the display to another location to see if the interference is reduced.
Why is the color abnormal on my AG Neovo QX-24 Monitor?
If the color on your AG Neovo monitor appears abnormal, ensure that the signal cable is firmly attached to the back of the display.
What to do if I hear sound but no picture on AG Neovo QX-24 Monitor?
If you can hear sound but see no picture on your AG Neovo monitor, ensure that both video and sound input cables are correctly connected.
How to adjust screen size on AG Neovo QX-24?
If the display image on your AG Neovo monitor doesn't fill the full screen, the picture format may not be set correctly. Press the button on the control panel or the Aspect button on the remote control to select the appropriate picture format.
Why does my AG Neovo QX-24 Monitor have after-images?
If after-images are visible on your AG Neovo monitor after it's powered off, it may be due to a still picture being displayed for an extended period. Avoid displaying still images for long durations, as this can cause permanent after-images.
What to do if some pixels don't light up on AG Neovo Monitor?
This AG Neovo display is manufactured with high-precision technology. However, some pixels may not light up. This is not a malfunction.
General| Panel Type | IPS |
|---|---|
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Refresh Rate | 60 Hz |
| Viewing Angle (H/V) | 178°/178° |
| Connectivity | HDMI, VGA, DVI |
| Color Support | 16.7 million colors |
To Next Page
