AG Neovo QD-75 - User Manual

Questions and Answers

T
Tara BurkeAug 15, 2025
What to do if my AG Neovo QD-75 Monitor has picture but no sound?
- K
  Kevin AlvaradoAug 15, 2025
  If you can see a picture but no sound is coming from your AG Neovo monitor, here are a few things to check: 1. Ensure that both the video and sound input cables are correctly connected. 2. Increase the volume by pressing the [ ] or [ ] button. 3. Make sure the mute function is off by pressing the [ ] button. 4. If you are using external speakers, verify they are connected and the volume is adjusted properly.
T
Thomas DominguezAug 18, 2025
How to fix an AG Neovo QD-75 when no picture is displayed?
- D
  Deborah KingAug 18, 2025
  If your AG Neovo monitor is not displaying a picture, consider the following: 1. Ensure the power cord is securely plugged in. 2. Verify that the main power switch located on the back of the display is turned on. 3. Check that the selected input source has a valid connection. 4. Confirm that the monitor is not in standby mode.
S
schmidtjeffreyAug 22, 2025
What causes picture distortion on AG Neovo Monitor?
- A
  Adrienne BautistaAug 22, 2025
  Picture distortion with abnormal patterns on your AG Neovo monitor can be due to: 1. A loose signal cable - ensure the signal cable is firmly attached. 2. An input signal exceeding the display's capabilities - check the video signal source and compare it with the display's specifications.
G
gamblecolleenAug 25, 2025
Why is the color abnormal on my AG Neovo Monitor?
- R
  Rebecca ClaytonAug 26, 2025
  Abnormal color display on your AG Neovo monitor is often due to a signal cable that is not properly connected. Ensure that the signal cable is firmly attached to the back of the display.
B
Breanna WilliamsAug 28, 2025
What to do if my AG Neovo QD-75 has sound but no picture?
- N
  Nicole LloydAug 28, 2025
  If your AG Neovo monitor has sound but no picture, the source signal cable may be improperly connected. Make sure that both the video and sound inputs are correctly connected.
R
Robert TuckerAug 31, 2025
Why is there interference on my AG Neovo Monitor?
- K
  Kevin BlairAug 31, 2025
  Interference or audible noise on your AG Neovo monitor might be caused by nearby electrical appliances or fluorescent lights. Try moving the display to another location to see if the interference is reduced.
S
Sharon BlankenshipSep 4, 2025
How to adjust screen size on AG Neovo QD-75?
- J
  Jessica HammondSep 4, 2025
  If the display image doesn’t fill the full screen size on your AG Neovo monitor, this could be due to: 1. Incorrect zoom mode settings. 2. Incorrect Scan Mode settings, potentially set to underscan. If the image exceeds the screen size, Scan Mode may need to be set to Underscan. To resolve this, use the Zoom mode or Custom zoom function located in the Screen menu to fine-tune the display geometry and time frequency parameter.
D
Dustin LangSep 7, 2025
Why does my AG Neovo QD-75 Monitor have after-images?
- E
  Edward ReeseSep 7, 2025
  If you notice after-images on your AG Neovo monitor after it's powered off, it's likely because a still picture was displayed for an extended period of time. To prevent this, avoid displaying still images for prolonged durations, as it can cause a permanent after-image to remain on the display.
J
jesusdeleonSep 12, 2025
Why some pixels do not light up on AG Neovo QD-75?
- R
  rachelgarciaSep 12, 2025
  If some picture elements do not light up on your AG Neovo monitor, it's because this display is manufactured using an extremely high level of precision technology: however, sometimes some pixels of the display may not display. This is not a malfunction.