How to fix AG Neovo Touchscreen when there is no picture and the LED indicator is off?
If your AG Neovo Touchscreen displays no picture and the LED indicator is off, try the following: * Ensure the LCD display is turned on. * Verify the power cord is properly connected to the LCD display. * Confirm the power cord is plugged into the power outlet.
What to do if there is no audio output from my AG Neovo Touchscreen?
If you're experiencing no audio output from your AG Neovo Touchscreen, please check the following: 1. Ensure that the volume is not set to 0. 2. Verify that the AUDIO setting is not set to OFF. 3. If using VGA or DVI input, check the audio setting of the computer.
Why is the LED indicator on my AG Neovo Touchscreen AMBER?
If the LED indicator on your AG Neovo Touchscreen is amber, it could be related to the computer's status. First, ensure that the computer is turned on. If the computer is in standby mode, try moving the mouse or pressing any key to wake it up.
How to resolve blurry displayed texts on AG Neovo Touchscreen?
To fix blurry displayed texts on your AG Neovo Touchscreen, especially with VGA input, use the keypad to auto-adjust the display. You may also need to adjust the IMAGE SETTING.
How do I correct an incorrect image position on my AG Neovo Touchscreen?
To correct an incorrect image position on your AG Neovo Touchscreen, adjust the H. POSITION and V. POSITION values. For VGA source, see IMAGE SETTING; for Video signals, see ASPECT RATIO.
What causes faint shadows from static image on AG Neovo Touchscreen and how to remove them?
If you notice faint shadows from a static image appearing on your AG Neovo Touchscreen, try these solutions: * Turn off the LCD display for extended periods of time. * Run the Anti-Burn-In function. * Use a screen saver or a black and white image and run it for extended periods of time.
What to do if the OSD menu can’t be called out on AG Neovo Touchscreen?
If the OSD menu can’t be called out on your AG Neovo Touchscreen, the OSD might be locked. Unlock the OSD.
Why is there dew formed on or inside the LCD display of my AG Neovo Touchscreen?
Dew forming on or inside the LCD display of your AG Neovo Touchscreen typically occurs when the display is moved from a cold to a hot room. Do not turn on the LCD display and wait for the dew condensation to disappear.
Why do red, blue, green, white dots appear on the screen of my AG Neovo Touchscreen?
The appearance of red, blue, green, or white dots on the screen of your AG Neovo Touchscreen is normal. It is caused by a few damaged transistors producing spots. This is acceptable and not considered a failure.
Why is there mist formed inside the glass surface of my AG Neovo Touchscreen?
Mist forming inside the glass surface of your AG Neovo Touchscreen is due to humid weather conditions. This is a normal occurrence, and the mist will disappear after a few days or as soon as the weather stabilizes.
To Next Page
General
