AG Neovo 55C-TCH User Manual (English)

Questions and Answers:

E
Emily TorresAug 11, 2025
What to do if the AG Neovo 55C-TCH remote control does not work?
- M
  Mitchell ToddAug 11, 2025
  If the AG Neovo Monitor's remote control isn't working, try these steps: * Ensure the remote control function isn't locked; unlock it if necessary. * Verify the batteries are correctly oriented and not dead; replace them if needed. * Make sure you're within range and pointing the remote at the display's sensor, with no obstructions. * Avoid strong fluorescent lighting or direct sunlight on the sensor. * Turn off infrared functions on nearby devices like computers or PDAs that may cause interference.
M
Mark CoxAug 18, 2025
Why does my AG Neovo 55C-TCH Monitor have no picture?
- P
  phernandezAug 19, 2025
  If your AG Neovo Monitor displays no picture, check these items: * Confirm the display and the signal source device are both turned on, observing the power indicator. * Ensure all cable connections are secure. * Verify that the output resolution selected on your computer, DVD, or Blu-ray disc player is supported. Refer to "Supported input signal resolution" on page 47 to select a supported resolution.
S
Sydney SnyderAug 26, 2025
How to fix no sound on AG Neovo 55C-TCH?
- A
  Amy HarrisAug 26, 2025
  If there is no sound from your AG Neovo Monitor, check if the mute function is enabled on either the display or the input source device. Disable mute or increase the volume. Also, ensure all cable connections are properly connected.
R
Russell MezaSep 2, 2025
What to do if the computer input image looks strange on AG Neovo Monitor?
- J
  Jonathan MorenoSep 2, 2025
  If the computer input image on your AG Neovo Monitor looks strange, try the following: * Ensure that the computer's output resolution is supported (refer to "Supported input signal resolution" on page 47). * Use the Auto Adjustment function (Refer to "Adjust Screen" on page 39) to optimize the display. * If auto-adjustment is insufficient, manually adjust the image using the Clock Frequency, Phase, H. Position, and V. Position functions.