AG Neovo PN-55D - User Manual

Questions and Answers

K
Krista SmithAug 18, 2025
What to do if I can see picture but no sound on AG Neovo PN-55D?
- T
  Tracy DeckerAug 18, 2025
  If you can see the picture on your AG Neovo Monitor, but cannot hear any sound, there might be several reasons. First, ensure that both video and sound input cables are correctly connected. Second, the volume might be turned all the way down, so try pressing the volume button to increase it. Third, the MUTE function could be on, so switch it off using the button. Finally, if you are using external speakers, make sure they are connected and the volume is adjusted to a suitable level.
A
Angela GarciaAug 20, 2025
How to fix no picture on AG Neovo PN-55D?
- K
  Kimberly EllisAug 21, 2025
  If your AG Neovo Monitor displays no picture, there are a few potential causes. First, ensure that the main power switch on the back of the display is switched on and that the power cord is properly plugged in. Second, check if the selected input has a connection and connect a signal cable to the display. Third, confirm that the display is not in standby mode and that the power switch is on.
J
Jeffrey ThomasAug 23, 2025
What to do if I can hear sound, but no picture on AG Neovo Monitor?
- C
  Curtis McneilAug 23, 2025
  If you can hear sound but there's no picture on your AG Neovo Monitor, the source signal cable may not be connected properly. Ensure that both video and sound inputs are correctly connected.
L
Lori BrownAug 26, 2025
Why is the color abnormal on my AG Neovo PN-55D Monitor?
- D
  davisryanAug 26, 2025
  If the color on your AG Neovo Monitor is abnormal, the signal cable may not be connected properly. Ensure that the signal cable is firmly attached to the back of the display.
R
rhallAug 28, 2025
What to do if picture is distorted with abnormal patterns on AG Neovo PN-55D Monitor?
- D
  Daniel NealAug 28, 2025
  If the picture on your AG Neovo Monitor is distorted with abnormal patterns, the signal cable may not be connected properly, so make sure that the signal cable is firmly attached. Also, the input signal might be beyond the capabilities of the display. Check the video signal source to see if it exceeds the display's range, and verify its specifications.
C
Christine CastilloAug 30, 2025
How to make display image fill the full screen on AG Neovo Monitor?
- I
  Ian BrownAug 30, 2025
  If the display image doesn’t fill up the full size of the screen on your AG Neovo Monitor, the picture format might not be set correctly. Press the button and select Auto zoom to adjust the picture format.
J
jodycooperSep 1, 2025
How to stop interference displayed on AG Neovo PN-55D Monitor?
- R
  rbrownSep 1, 2025
  If you are experiencing interference on your AG Neovo Monitor or hear audible noise, it may be caused by surrounding electrical appliances or fluorescent lights. Try moving the display to another location to see if the interference is reduced.
E
Emily MckenzieSep 3, 2025
Why some picture elements do not light up on AG Neovo PN-55D?
- R
  Rhonda RangelSep 4, 2025
  This display is manufactured using an extremely high level of precision technology; however, sometimes some pixels of the display may not display. This is not a malfunction.
L
levi89Sep 6, 2025
How to prevent after-images on AG Neovo PN-55D?
- L
  Larry ReidSep 6, 2025
  To prevent after-images on your AG Neovo Monitor, do not allow a still image to be displayed for an extended period of time, as this can cause a permanent after-image to remain on the display.
M
Matthew MillerSep 8, 2025
What to do if my AG Neovo Monitor has no picture?
- R
  Robin RichardsonSep 8, 2025
  If your AG Neovo Monitor shows no picture, verify the following: * Ensure the display is powered on by checking the power indicator. * Confirm the signal source device is on and functioning. * Check all cable connections to ensure they are firmly connected. * Verify that the computer's output resolution is supported (refer to Supported input signal resolution on page 37). * If using a DVD or Blu-ray player, ensure its output resolution is supported (refer to Supported input signal resolution on page 37).