To Next Page
A
Ashley DavisSep 12, 2025
Why does the remote control not work on my AG Neovo Monitor?
- MMaureen PetersonSep 12, 2025
If the AG Neovo Monitor's remote control isn't working, consider these possible solutions: * Ensure the remote control function isn't locked; unlock it if necessary. * Verify the batteries are correctly oriented. * Replace dead batteries with new ones. * Make sure you're within the proper distance and angle from the display. * Confirm the remote is pointed directly at the monitor's sensor window. * Remove any obstructions between the remote and the sensor. * Check if strong fluorescent lighting or direct sunlight is interfering with the sensor. * Turn off infrared functions on nearby devices (like computers or PDAs) that might be causing interference.
General
