What to do if AG Neovo PN-46D2 power indicator is on but no image?
If your AG Neovo monitor's power indicator is on but there's no image, the video wire might be loose or incorrectly connected. Ensure it's properly connected or try replacing it. Also, check the video signal source and its connection at the output end to make sure it's properly connected.
Why is the AG Neovo Monitor screen dim?
If your AG Neovo monitor screen appears dim or extremely bright, the brightness or contrast settings might be the issue. Please check these settings and adjust them as needed. Alternatively, you can restore the monitor to its default settings.
How to fix AG Neovo PN-46D2 when the power indicator does not come on?
If the power indicator on your AG Neovo monitor doesn't light up, the monitor might not be getting power. Check that the power cord is properly connected and that the monitor is switched on.
Why is there a color difference on my AG Neovo PN-46D2 Monitor?
If you notice color differences on your AG Neovo monitor, it might be due to improper chromatic saturation. Check the chromatic saturation settings. You may also need to adjust the RGB values or reset the color temperature. If that doesn't work, restore the monitor to its default settings.
What to do if the image is distorted on AG Neovo PN-46D2 Monitor?
If the image on your AG Neovo monitor is distorted, the aspect ratio might be incorrect. Try resetting the aspect ratio to see if that resolves the issue.
Why is my AG Neovo PN-46D2 Monitor image jerking?
If you're experiencing image jerking or ripple on your AG Neovo monitor, an electrical device might be interfering with the video signals. Try turning off nearby electrical devices or relocating the monitor to a different area.
General| Resolution | 1920 x 1080 |
|---|---|
| Brightness | 450 cd/m² |
| Contrast Ratio | 3000:1 |
| Viewing Angle | 178° (H) / 178° (V) |
| Screen Size | 46 inches |
| Panel Type | LCD |
| Connectivity | HDMI, DVI, VGA |
To Next Page
