AG Neovo PD-49 - User Manual

Questions and Answers

C
Carol CrawfordAug 14, 2025
What to do if my AG Neovo PD-49 Monitor has picture but no sound?
- R
  Ryan WilliamsAug 14, 2025
  If you can see the picture but cannot hear any sound on your AG Neovo monitor, there might be several reasons. First, ensure that both the video and sound input cables are correctly connected. Second, check if the volume is turned all the way down, and if so, press the volume buttons to increase it. Also, verify that the MUTE function is turned off by using the appropriate button. Finally, if you are using external speakers, ensure they are connected properly and the volume is adjusted to a suitable level.
A
Albert HullAug 17, 2025
How to fix an AG Neovo PD-49 when no picture is displayed?
- M
  Michael HaneyAug 18, 2025
  If your AG Neovo monitor is not displaying any picture, try the following: First, plug in the power cord. Second, make sure the power switch is switched on. Finally, ensure a signal connection is properly connected to the display.
P
Patricia PattonAug 21, 2025
What to do if AG Neovo PD-49 picture is distorted?
- Z
  zvargasAug 21, 2025
  If the picture on your AG Neovo monitor is distorted with abnormal patterns, it could be due to a couple of reasons. First, make sure that the signal cable is firmly attached. Second, the input signal might be beyond the capabilities of the display. Check the video signal source to ensure it is within the supported range, referring to the display's specifications.
W
Wanda BlackwellAug 25, 2025
Why is the color abnormal on my AG Neovo PD-49?
- A
  Andre MatthewsAug 25, 2025
  If the color on your AG Neovo monitor appears abnormal, the signal cable might not be connected properly. Ensure that the signal cable is firmly attached to the back of the display.
S
Stephanie CookAug 27, 2025
What to do if my AG Neovo Monitor has sound but no picture?
- F
  fgalvanAug 27, 2025
  If you can hear sound but there is no picture on your AG Neovo monitor, the source signal cable may be improperly connected. Make sure that both video and sound inputs are correctly connected.
J
Jesse CastroAug 31, 2025
Why is there interference on my AG Neovo monitor?
- B
  Brandon McdonaldAug 31, 2025
  If you are experiencing interference or audible noise with your AG Neovo monitor, it may be caused by surrounding electrical appliances or fluorescent lights. Try moving the display to another location to see if the interference is reduced.
C
Courtney WatersSep 3, 2025
How to fix the display image when it doesn't fill the screen of my AG Neovo Monitor?
- R
  Reginald ClarkSep 3, 2025
  If the display image doesn’t fill up the full size of the screen on your AG Neovo monitor, the picture format might not be set correctly. Press the button and select Auto zoom.
M
Michael BellSep 7, 2025
Why does my AG Neovo Monitor show after-images?
- L
  Luke HowardSep 7, 2025
  If you notice after-images on your AG Neovo monitor even after it's powered off, it's likely because a still picture was displayed for an extended period. Avoid displaying still images for long durations, as this can cause a permanent after-image to remain on the display.
M
Michelle ChambersSep 10, 2025
What if some pixels don't light up on my AG Neovo PD-49?
- J
  James JonesSep 10, 2025
  This AG Neovo display is manufactured using an extremely high level of precision technology; however, sometimes some pixels of the display may not display. This is not a malfunction.