To Next PageTo Next Page
Need help?Do you have a question about the AGA OC and is the answer not in the manual?
General| Brand | AGA |
|---|---|
| Model | OC |
| Category | Kitchen Appliances |
| Language | English |
Manufacturer's commitment to safety standards for product design and construction.
Safety precautions for deep fat frying, including pan use and fire management.
Manufacturer's commitment to safety standards for product design and construction.
Lists the accessories supplied with the AGA cooker.
Explains the function and interpretation of the heat indicator on the AGA cooker.
Describes how the cooker's thermostat controls the burner automatically.
Explains how to operate the burner manually, especially during power failures.
Specifies the required type of oil for the AGA cooker and warns against using others.
Provides instructions on how to safely extinguish the AGA burner.
Details the procedure for safely lighting the AGA burner, including safety checks.
Explains how to reset the fire valve in case of an issue.
Provides guidance on the initial operation and use of the AGA cooker.
Information regarding initial startup and potential odours after the AGA is installed.
General tips and advice for cooking with the AGA cooker.
Specific guidance and warnings for deep fat frying on the AGA.
Guidance on cleaning the vitreous enamelled surfaces of the AGA cooker.
Advice on cleaning and maintaining cast iron components of the cooker.
Instructions for cleaning the insulated covers and oven door linings.
Recommendation to use only genuine AGA spare parts for maintenance.
Crucial safety warnings and actions to take in case of gas leaks.
Important safety notes regarding moving the unit and using spare parts.
Manufacturer's commitment to safety standards for product design and construction.
Specifies that installation must be by certified persons adhering to regulations.
Requirements for non-combustible hearths and walls behind the appliance.
Specifies the approved fuel type for the AGA oil-fired cookers.
Factors to consider for placing the appliance, ensuring flue and air supply.
Details requirements for oil storage tanks and pipelines, including tank positioning.
Specifications for the oil pipeline, including filters, pipe size, and stop valves.
Explains the function of the oil control valve and its electrical activation by the thermostat.
Recommendations for flue pipe materials, diameters, and termination points.
Guidelines for chimney termination points to avoid downdraught issues.
Requirements for permanent air vents and considerations for air extract fans.
