AgaMatrix Presto - Meter Navigation and Deactivation; Navigating Meter Options and Deactivating

14
[2] Press the RIGHT or LEFT arrow buttons to view the options:
MEM (14, 30, and 90 Day Averages and Graphs), SET (meter
settings), and AL1 to AL6 (reminder alarms 1 thru 6).
Enter MEM (Memory) Mode to view 14, 30, and 90 Day
Averages and Graphs:
[1] Enter the MENU mode.
[2] Press the RIGHT or LEFT arrow buttons until the MEM
symbol is displayed.
[3] When the MEM symbol is displayed, press the CENTER
button.
Enter SET (Settings) Mode:
[1] Enter the MENU mode.
[2] Press the RIGHT or LEFT arrow buttons until the SET
symbol is displayed.
[3] When the SET symbol is displayed, press the CENTER
button.
HOW TO DEACTIVATE THE METER
To deactivate the meter, press and hold the CENTER button
for 2 seconds. If left inactive for 3 minutes, the meter will be
deactivated automatically.
HOW TO ACCELERATE THRU OPTIONS
Hold down the RIGHT or LEFT arrow buttons to accelerate
thru options or results.