47
[1] Enter MENU Mode: When your meter is deactivated,
press and hold any button for 2 seconds to enter the MENU
mode.
[2] Enter SET Option: The MEM symbol will appear. Press
the RIGHT or LEFT arrow buttons until the SET symbol is
displayed. Press the CENTER button.
[3] Setting Your Hypoglycemic Warning Alarm:
WARNING: Your healthcare professional should recommend
what your hypoglycemic limit is.
Press the CENTER button repeatedly until you see the HYPO
symbol in the top right corner of the screen. You are ready to
set the Hypoglycemic Warning Alarm. The Hypoglycemic and
Hyperglycemic Warning Alarms are set to “OFF” by default.
The Hypoglycemic Warning Alarm alerts you when your glucose
test results are below the hypoglycemic limit that you have set.
The meter is pre-set to a hypoglycemic limit of 70 mg/dL. Always
consult your healthcare professional for your recommended
target ranges. When your glucose test results are below your set
hypoglycemic limit, the date, time and result will flash on the
display.
Set the Hypoglycemic Limit ON or OFF with the
RIGHT or LEFT arrow buttons. Your selection will be
highlighted by the blinking of the symbol. Press the
16
CHAPTER
Setting Hypoglycemic and
Hyperglycemic Warning Alarms
To Next Page
Loading...
