27
The test strip acts like a sponge and draws the blood into the
test strip through the sample area. The visual fill window of the
test strip will turn red.
Remove Test Strip from Blood Sample
when you hear the beep: Your meter will
beep once, when you should remove the
tip of the test strip from the blood sample.
On the display, blood
drop symbols appear on
the test strip symbol.
The moving dot bar and 1-2-3 indicates
that the meter is calculating your results.
Your test is completed when your blood
glucose test result with time and date
is shown on the display. If the volume is
enabled in SET Options, you will hear a
beep. Your test result is now stored in the
memory.
This is the visual
ll window.
DO NOT PUT
BLOOD HERE.
Apply
blood here.
The entire
visual ll
window will
turn red.
To Next Page
Loading...
