USING THE MIXING BOWL
1. In order to lift the arm, press the Rise button (2) downwards
in the direction of the arrow. The arm will now move
upwards.(FIG1)
2. Place the pot cover into its body.(FIG2)
3. Place the mixing bowl into its holding device(Step①) and
turn the bowl clockwise until it locks into place(Step ②).
FIG3)
4. Mount the required utensil（Dough hook or Beater or
Whisk）by inserting the top into the output shaft, and turn
anti-clockwise until it locks into place. (FIG4&FIG5)
5. Now fill in your ingredients.
Do not overfill the machine - the maximum quantity of
ingredients is 1.0Kg.
6. Lower the arm using the rise button (2). (FIG6)
7. Insert the mains plug into a properly installed 220-240V~
50-60Hz safety power socket.
8. Switch the machine using the speed button to a speed
between 1 and 6 (corresponding to the mixture).
9. For pulse operation (kneading at short intervals), turn the
switch to the “PULSE” position. The switch has to be held in
this position according to the desired interval length.
When the switch is released it returns automatically to the
“0” position.
10. After kneading/stirring turn the speed knob (3) back to the
“0” position as soon as the mixture has formed a ball. Then
remove the mains plug.
11. Press the rise button (2) downwards and the arm will be
raised.
12. The mixture can now be released with the help of a
spatula and removed from the mixing bowl.
13. The mixing bowl can now be removed.
14. Clean the parts as described under “Cleaning”.
To Next Page
Loading...