632154-1 1-5
Safety
FIG. 5: High Pressure Fluid Hazard (2)- Risk of
Scalding or Burns.
Safety sign is located near expansion tank.
Pressurized coolant can cause serious burns. To open
cooling system filler cap, stop engine and wait until
cooling system components are cool. Loosen cooling
system pressure cap slowly to relieve pressure.
FIG. 6: Danger-Do not enter the product tank (3), great
risk of serious injury or death.
Safety sign is located near entrance product tank.
The manhole on the product tank is only for visible
inspection, never enter the product tank.
FIG. 7: Danger - Chemical and Confined space
hazard. (4)
Safety sign is located on product tank and near eductor.
Do not allow chemical solution to come in contact with
skin or eyes. Some chemicals can be absorbed into
body through skin. Wear rubber gloves, safety glasses
and protective clothing at all times. Cover on tank must
be open while servicing tank. Ventilate tank before and
during servicing. Do not ingest chemical - Chemicals
can be toxic. Read and follow manufacturer’s
instructions. Do not breathe vapour, wear proper
respirator when working around chemicals.
FIG. 8: Retorque wheel nut with 500 Nm (5).
Decal is located on every rim.
Follow the instructions given in the Lubrication &
Maintenance section.
FIG. 5
FIG. 6
FIG. 7
FIG. 8
R511210D1S
To Next Page
Loading...
Need help?
General
