632154-1 1-23
Safety
FIG. 55: Clean machine of hazardous chemicals after
use. Hazardous chemical residue can build up on
inside and outside of machine.
m
WARNING: Direct exposure to hazardous
chemicals can cause serious injury or
death. Potentially hazardous chemicals
used with AGCO equipment include such
items as fuel, lubricants, coolants,
hydraulic fluid, paints and adhesives.
FIG. 56: The Material Safety Data Sheet (MSDS)
provides specific details on hazardous chemical
products, physical and health hazards, safety
procedures and emergency response techniques.
Check MSDS before using any hazardous chemical.
Know risks and how to perform project safely. Follow
procedures and equipment recommendations.
(See chemical manufacturer for MSDS's on chemical
products used with AGCO equipment).
WEAR PROTECTIVE CLOTHING
FIG. 57: Wear close fitting clothing and proper safety
equipment required.
Wear suitable hearing protection such as earmuffs or
earplugs to protect against loud noises.
Prolonged exposure to high noise levels can cause
hearing impairment.
Operating equipment requires operator’s full attention.
Never wear headphones while operating machine.
WORK IN A CLEAN AREA
FIG. 58: Thoroughly clean work area, machine,
systems and components before starting work. Dirty
and greasy areas can create work hazards.
FIG. 55
FIG. 56
FIG. 57
FIG. 58
To Next Page
Loading...
Need help?
General
