632154-1 1-21
Safety
MAINTENANCE AND SERVICE
FIG. 49: Read and understand maintenance and
safety instructions before performing any maintenance
procedures.
Only trained and qualified personnel should perform
any maintenance procedures or repairs.
Never modify any equipment or add attachments not
approved by AGCO.
PRACTICE CORRECT MAINTENANCE
FIG. 50: Never lubricate, service or adjust any
systems or components while machine is moving.
Never wear a necktie, necklace, scarf or loose clothing
when working near machine tools or moving parts.
Tie long hair behind head and wear a hair net.
Remove all jewellery to prevent electrical shorts or
other personal injury when working with machine tools
or moving parts.
FIG. 51: Stop engine and remove key.
Allow machine to cool down.
Keep all parts in good condition and properly installed.
Fix any damaged machine systems or components
immediately.
Replace worn, damaged or broken parts immediately.
Remove any build up of grease, oil or debris.
Disconnect electrical system before making
adjustments or welding on machine.
FIG. 49
FIG. 50
FIG. 51
To Next Page
Loading...
Need help?
General
