EasyManua.ls Logo

AGCO LELY RPC 130 F User Manual

AGCO LELY RPC 130 F
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operator's Manual
Baler Wrapper Combination
RPC 130 F
RPC 160 V
Wolfenbüttel
AGCO GmbH - Gebrüder-Welger-Straße 3 - D-38304
Wolfenbüttel
LELY is a worldwide brand of AGCO
© AGCO 2018
Original Operator's Manual
May 2018
4900.LE.EN01
EME
English

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the AGCO LELY RPC 130 F and is the answer not in the manual?

AGCO LELY RPC 130 F Specifications

General IconGeneral
BrandAGCO
ModelLELY RPC 130 F
CategoryIndustrial Equipment
LanguageEnglish

Summary

Safety

Safety Icons

Explains DANGER, WARNING, CAUTION, and NOTE signal words used in safety messages.

Safety Instructions

General safety rules for operation, maintenance, and general handling of the machine.

Safety Decals

Identifies and explains the location of safety decals on the machine's exterior.

Safety Devices

Describes essential safety devices like emergency stop buttons and protective safeguards.

Danger Zones

Outlines hazardous areas around the machine during operation and bale ejection.

Operation

First Use

Guides through initial setup and connection procedures before first operation.

Connect the Machine to the Tractor

Step-by-step instructions for safely connecting the machine to the tractor.

Transport Position and Driving

Procedures for preparing and driving the machine safely in transport mode.

Prepare the Machine to Bale

Essential steps to ready the machine for baling and wrapping operations.

To Operate the Machine

Comprehensive guide on operating the baler wrapper during baling and wrapping.

Disconnect the Machine from the Tractor

Detailed instructions for safely disconnecting the machine from the tractor.

Maintenance and Lubrication

Preventative Maintenance Schedule

Outlines maintenance tasks based on operating hours, bale count, and time intervals.

Lubrication Chart

Lists specific lubricants and their application points on the machine.

Troubleshooting

Manually Remove a Blockage From the Feed Channel Floor

Detailed steps to manually clear blockages from the feed channel floor.

Related product manuals