5.5.3 Install the Wheel
Procedure
1. Install the replacement wheel.
2. Install the wheel nuts.
3. Tighten the wheel nuts by hand.
4. Lower the machine to the ground with the jack.
5. Tighten the wheel nuts in the correct sequence (crosswise) with a calibrated torque wrench. Tighten
them in the correct sequence and tighten again to the correct torque.
6. Make sure that the new tyre is at the correct pressure.
7. After you move for 1 hour tighten the wheel nuts to the correct torque again.
TASK_0A493F6841E84B0BAF42B0A03640672F [V]
5. Troubleshooting
154 Baler Wrapper Combination
4900.LE.EN01
To Next Page
Loading...
Need help?
General
