4 Maintenance and Lubrication
4.1 Preventative Maintenance Schedule ..................................... 113
4.2 Lubrication Chart .......................................................115
4.3 Clean the Machine ..................................................... 119
4.4 Chain Lubrication System Maintenance ..................................120
4.4.1
Check the Level in the Oil Container of the Chain Lubrication ................... 120
4.4.2
Fill the Oil Container ................................................. 120
4.4.3
Bleed Air from the Lubrication Pump ..................................... 121
4.5 Roller Lubrication System Maintenance (RPC 130 F only) ................. 123
4.6 Tighten the Chains of the Pick-Up, Bale Chamber and Feed Rotor ......... 124
4.7 Tighten the Chains of the Wrapper ...................................... 126
4.8 Examine the Hydraulic Oil Filter ......................................... 127
4.9 Replace the Hydraulic Oil Filter ..........................................128
4.10 Examine the Hydraulic Hoses for Damage and Leaks ..................... 129
4.11 Grind the Cutting Unit Knives ........................................... 130
4.11.1 Remove the Knives ................................................. 130
4.11.2 Grind the Knives ....................................................131
4.11.3 Install the Knives ................................................... 131
4.12 Replace the Knives with Blind Knives ....................................132
4.12.1 Remove the Knives ................................................. 132
4.12.2 Install the Blind Knives ............................................... 133
4.13 Replace the Film Knives ................................................ 134
4.14 Adjust and Replace the Belt Guide Pulleys ............................... 135
4.15 Adjust the Disk Brake of the Net Tying Unit .............................. 136
4.16 Adjust the Shock Absorbers ............................................ 137
4.17 Adjust the Tension Arm of the Wrapping Ring ............................ 138
4.18 Adjust the Tension of the Film Stretching Unit ........................... 139
4.19 Adjust the Wrapper Frame Brake Tension ................................ 140
4.20 Lubricate the Tailgate and Tensioning Arm Rollers (only RPC 160 V) ........141
4.20.1 Loosen the Belts ................................................... 141
4.20.2 Lubricate ......................................................... 141
4.20.3 Tighten the Belts ................................................... 141
4.21 Adjusting the Deflectors (only RPC 130 F) ................................ 143
4.22 Tensioning the Roller Chains (only RPC 130 F) ............................ 144
4.23 Lubricate the Rollers (only RPC 130 F) ................................... 146
Table of contents
Baler Wrapper Combination 111
4900.LE.EN01
To Next Page
Loading...
Need help?
General
